Hey Robert, most likely what you are looking for is the replacement LED Light Strip part # LC423331 which is the replacement LED light strip for Solera RV awning like what you most likely have on your 2017 Thor Vegas.
This is just the LED light strip of the Vista LED light kit part # LC25VR which you can check out and see if the rail for the light strip matches this. view full answer...
Yes you can connect another 16' long LED Light Strip to part # DG52684. However, this LED light strip part # DG52684 is green. If you wanted to connect to 16' sections of blue LED strip light you could use 2 sets of Blue light strip part # DG52684 with the connectors part # DG52675PB. You would cut the strips on the copper lines and insert the connectors. view full answer...
We do have a couple of options that are similar to the Opti-Brite LED Strip Light for RV Awnings # ILL71CBAWN that you're looking for, but we do not have an exact copy of this LED light strip that is submersible.
Instead, take a look at the:
-Thinline Opti-Brite LED Utility Light Strip - Submersible # ILL72CB which measures 22" long, or the,
-Optronics Thinline LED Utility Light Bar - Submersible # BUL69CB which measures 15" long.
Either of these options will work great for you and... view full answer...
If you just need the replacement LED strip, then you'll just need the Replacement LED Light Strip for Solera RV Awnings # LC423331 and cut it down to fit your 14' awning.
If you are wanting to add a LED strip to an awning that does not already have a strip then you'll want the LED Fabric Light Kit with Switch/Plate for Solera RV Awning with Prepflex Fabric # LC674282 instead which includes the light strip, switch and plate. view full answer...
The only 60 inch long LED light strip we offer would be # A80170. The strip would be tapped into the vehicle wiring, like the running light circuit and would be powered by the vehicle battery. We offer a few LED light strips that are powered by their own battery packs, but they are much shorter at 18 inches.
If you click the provided link, you can see the LED light strips we have available. view full answer...
Yes, the Optronics Flexible LED Light Strip # UCL90CB does have wiring on both ends allowing you to cut the strip in 2. We also have the Optronics LED Light Strip 12-Volt Connector with Wire Leads # A90PB if you need to cut it into additional pieces. view full answer...
The Optronics Flexible LED Light Strip part # UCL90CB is 3/8" wide as is the Replacement LED Light Strip for Solera RV Awnings part # LC423331 so you should be able to swap them for one another but we cannot confirm this. Please note, the former light strip is only 17' long whereas the latter is 20' but they are both cut to fit. view full answer...
The Replacement LED Light Strip for Solera RV Awning LED Fabric Light Kits part # LC423331 is just for the light strip, it does not contain the housing that the light strip slides into and then onto the awning cord. If you need this we do offer the light and housing as a kit, the LED Fabric Light Kit with Switch/Plate for Solera RV Awning with Prepflex Fabric part # LC674282 for 15' or part # LC674283 for 21'. These are cut to fit as well if you need a different length. view full answer...
No, the Slim LED Strip Light # TN84ZR is designed for flat surfaces so it's not going to accommodate a curved surface.
Your best bet would be to use a standard LED strip like the Replacement LED Light Strip for Solera RV Awnings # LC423331 which can be used on curved surfaces. view full answer...
The Valterra Mini Rope Light you're referring too has been discontinued but yes you could cut it and splice it to a 12V power supply.
If you're just trying to add an LED light strip to replace your current LED lights, then I recommend just going with the LED Light Strip # DG52683.
This light strip is 16' long but can be cut every 3 LEDs, blue in color, and has an exposed end for you to be able to easily splice into your setup. view full answer...
We do have a stick-on LED light strip that is the length you want, though the 33" Optronics Flexible Silicone LED Utility Light Strip UCL07CB can't be cut to between 11 and 20 inches. Instead, you can use an option from Buyers Products:
- Buyers Products LED Light Strip - Warm White Light - 27 Diodes - 18" Long # 3375621827
The # 3375621827 is 18" long but can be cut if you needed it shorter, and sticks on with 3M adhesive backing. view full answer...
Thanks for that part number, and due to that I was able to verify the exact replacement LED light strip for you. The V000305374 is the 21' Wide Roller and Fabric w/ LED Kit for Solera RV Awnings # LC94HD, and the exact replacement for the LED light strip is the following:
- Replacement LED Light Strip for Solera RV Awnings # LC423331 view full answer...
The LED light strips on awnings installs in a track on the roller of it. What you have now would install in the track of the Solera 17' Replacement Awning Fabric # LCV000334407. Before you remove your old awning you'd want to remove the LED light strip and then install it in the roller of the new fabric. view full answer...
The problem with this idea is that the multicolor led light strips use a receiver and remote to change the color of the lights. these receivers require a separate power supply. There are LEDs that do not require the receiver and remote like # LC423331, but these are only one color but they will wire in to your existing lights. You could make this work with the solid color LED strip but not the multicolored strips.
If you were to put an LED strip in all your lights, you would need a receiver... view full answer...
I spoke with my contact at CIPA and the EVO Formance Ultrabrights LED Light Strip, # CM93281, has 12 LEDs on the 8" strip.
This light strip can wire into any 12-volt power source and can also wire into your brake light circuit so the strip will come on whenever you brake. Since this light was not designed to replace the turn, brake, or taillights on your vehicle, we do not have any wiring information nor can we recommend using the light strip in this way. view full answer...
90 degree connectors are not available for the LED Light Strip Kit # DG52694RF, or any of our other LED light strip kits for that matter. The good news though, is that this LED strip features a clear silicone casing flexible enough to accommodate a 90 degree angle without posing any concerns as far as damage goes. view full answer...
In regards to using the Optronics LED Light Strip 12-Volt Connector with Wire Leads part # A90PB with the Optronics Flexible LED Light Strips like part # UCL90CB, you'll need to make sure of two things. The first is that you are removing the double sides tape from the back of the light strip where it inserts into the connector. The second and the more important one is that you cut the light strip where indicated. The copper sections on the light strip would then line up with the silver... view full answer...
I did some research on your cap LED light strips on your 2019 Grand Design Momentum 351M toy hauler. We do carry LED strips that are compatible.
- Optronics Flexible LED Light Strip - Weatherproof - White # UCL90CB
Also, if you need to connect two sections of LED strips together, you will need the connectors # A90P1B. view full answer...
Hey Jean-Marc, thanks for the pictures! The replacement LED Light Strip for Solera RV Awnings # LC423331 does fit the awning light strip channel you have. view full answer...
Yes, the reverse lights on the Bully Fire Strip LED Lights # BLS-1103 are white. This LED strip has both white and red LED lights on the strip to produce different colored lights for the different functions that the light performs.
Because this LED light performs multiple functions, and your existing lights are incandescent, you may experience a hyper-flashing when the turn signal is applied. If you experience this, you will need to add a load resistor similar to the # DI34ZR to eliminate... view full answer...
Go To Results